Audio-Technica ATW-251/G 200 Series Freeway VHF Guitar Wireless System

ATW-R250 receiver, ATW-T201 transmitter and Hi-Z instrument input cable.Audio-Technica’s Freeway 200 Series Wireless Systems are designed to provide reliable performance, easy setup and clear, natural sound quality. Each 200 Series professional VHF wireless system includes a receiver and either a body-pack transmitter or a handheld microphone/transmitter on a specific crystal-controlled frequency. A novel dipole antenna system on the receiver improves operation by providing a ground element in addition to the usual signal element.

• Easy operation and clear, natural sound quality


• Reliable performance and durable construction


• Advanced dipole antenna system for extended operating range


• Power, RF, and AF Peak indicators


• Volume control, ¼” output jack and space-saving power supply


• Rugged unidirectional dynamic element on handheld microphone/transmitter


• Variable microphone trim control and easily accessible On/Standby/Off switch on transmitters


• Professional locking connector on UniPak® body-pack transmitter

OVERALL SYSTEM SPECIFICATIONS

Operating Frequency	VHF high band, 169 MHz to 172 MHz
Number of Channels	Fixed channel
Frequency Stability	±0.005%
Modulation Mode	FM
Maximum Deviation	±15 kHz
Operating Range	200' typical
Operating Temperature Range	40° F (4° C) to 110° F (43° C)
Frequency Response	80 Hz to 13 kHz

Receiving System	Non-diversity, single-channel, dual antenna system
Image Rejection	50 dB minimum
Signal-to-noise Ratio	80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz
Total Harmonic Distortion	<=1% (10 kHz deviation at 1 kHz)
Sensitivity	20 dBµV for 60 dB S/N (IEC-weighted)
Audio Output	350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load)
Output Connector	1/4" TS ("mono") phone jack
Power Supply	100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply
Dimensions	7.48" (190.0 mm) W x 1.65" (42.0 mm) H x 5.12" (130.0 mm) D
Net Weight	11.0 oz (311 g)
Accessory Included	Power supply

RF Power Output	10 mW High position, 2 mW Low position, typical
Spurious Emissions	Under federal regulations
Dynamic Range	>=90 dB, A-weighted
Input Connections	High impedance, low impedance, bias
Battery	9V (NEDA type 1604) alkaline, not included
Current Consumption	30 mA typical
Battery Life	Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern)
Dimensions	2.56" (65.0 mm) W x 4.33" (110.0 mm) H x 1.00" (25.4 mm) D
Net Weight	2.8 oz (78 g) (without battery)

Quantity:   Size Channel T2 Channel T3 Channel T8